ACME GLAMOUR 700Z RGBY Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 28

ACME GLAMOUR 700Z RGBY Скачать руководство пользователя страница 9

DMX Settings

Enter MENU mode, select DMX Settings, press the ENTER button to confirm, use the UP/DOWN
button to select DMX Address, Channel Mode or View DMX Value.

DMX Address

To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the
address from 001 to 512, press the ENTER button to setup. Press the MENU button back to the last
menu or let the unit idle one minute to exit menu mode.

Channel Mode

To select Channel Mode, press the ENTER button to confirm. Use the UP/DOWN button to select
Mode1 (15), Mode2 (27) or Mode3 (17), press the ENTER button to setup. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.

View DMX Value

To select View DMX Value, press the ENTER button to confirm. Use the UP/DOWN button to view
the DMX channel values. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.

Fixture Settings

Enter MENU mode, select Fixture Settings, press the ENTER button to confirm, use the UP/DOWN
button to select Pan Invert, Tilt Invert, P/T Feedback, BL.O. P/T Moving, White Balance, Cooling
Mode, Dimmer Curve or Dimmer Speed.

Pan Invert

To select Pan Invert, press the ENTER button to confirm. Use the UP/DOWN button to select No
(normal) or Yes (pan invert), press the ENTER button to setup. Press the MENU button back to the
last menu or let the unit idle one minute to exit menu mode.

Tilt Invert

To select Tilt Invert, press the ENTER button to confirm. Use the UP/DOWN button to select No
(normal) or Yes (tilt invert), press the ENTER button to setup. Press the MENU button back to the
last menu or let the unit idle one minute to exit menu mode.

8E

«
...
7
8
9
10
11
...
»

Содержание GLAMOUR 700Z RGBY





























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды