All
To select All, press the ENTER button to confirm. Use the UP/DOWN button to select No or Yes
(the unit will run built-in program to reset all motors to their home positions), press ENTER button
to store. Press MENU button to exit menu mode.
Special Functions
Enter MENU mode, select Special Functions, press the ENTER button to confirm, use the
UP/DOWN button to select Fixture Maintenance or Factory Setting.
Fixture Maintenance
To select Fixture Maintenance, press the ENTER button to confirm. Use the UP/DOWN button to
select Interval or Remain Time, Press the ENTER button to confirm, press the MENU button to
exit.
Factory Setting
To select Factory Setting, press the ENTER button to confirm. Use the UP/DOWN button to select
No or Yes (the fixture will reset to factory settings and exit menu mode).
3.3 Home Position Adjustment
In the main functions, hold the ENTER button for at least 3 seconds into offset mode, use the
DOWN/UP button up to select Pan, Tilt or Zoom, and press the ENTER button to confirm. Use the
DOWN/UP button to adjust the home position of the Pan, Tilt or Zoom, once the position has
been selected, press the ENTER button to setup, to go back to the functions without any change
press the MENU button again. Press and hold the MENU button about one second or wait for
about one minute to exit the menu mode.
13H
