V.3.01 www.FlyCamOne.com
Control the FCOIII‘s head
Three different solutions to move the head:
A The circle „
“of the FCOIII logo controls the head.
B It can be controlled by the optional available FCOIII LinX hand sender (Art.No:
FC3005). Insert the receiver into the RX socket.
C With the optional FCOIII RX cable (Art.No: FC3009).
You need up to three free channels at your R/C receiver for head movement
(Pan/Tilt) and shutter release.
Charging the FCOIII
Charge the camera at your computer’s USB-Port (5h) or with the included
adaptor (2h). Charging will be indicated by a pulsing battery symbol in the
LCD panel. Charging is finished when all elements of the symbol are filled.
Using FCOIII Transmitter Sets
(Art.No: FC3002)
Adding the FCOIII Transmitter Set the video signal will be transferred to the
receiver at 2.4GHz up to a range of 300m/980ft. The screen module will be
exchanged against the sender, and the screen will be fixed to the receiver now.
Interferences will not be recorded because the camera will record, not the ground
station.
The FCOIII V-Eyes Video glasses
(Art.No.FC3004)
Instead of the screen, the V-eyes
battery pack will be fixed to the
receiver now. See the picture on
two screens in front of your eyes
now. The integrated Head
Tracking System combined with a
R/C controller is moving the
camera’s head now.
Replacing the Lipo Battery of
the FCOIII
(Art.No.FC3010)
Lift the battery and disconnect the plug. Insert the new one. Dispose empty
Batteries at a recycling centre.
Important! Only use the original FCOIII Lipo battery 500mAh with integrated Lipo-
Saver!