5B
○
3 Button:
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
○
4 Only for remote control:
Connecting with CA-8/CA-9/CA-9RTX to control the unit for
Stand by, Function and Mode function.
○
5 DMX output:
For DMX512 link, use 3-pin XLR plug cable to link the next unit.
○
6 DMX input:
For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal
○
7 Mains input:
Connect to supply mains power for the unit.
3.2 Main Function
To select any functions, press
MENU
button until the required one is shown on the display.
Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button
to change the mode. Once the required mode has been selected, press
ENTER
button to
setup or it will automatically return to the main functions without any change after idling one
minute. Back to the functions without any change press
MENU
button. The main functions
are shown below:
