ACME CA-AN04T, Руководство пользователя

Страница: 11 / 20

10A
Any of the port 1-4 also can be set as Output or Disabled status. Upon the port
has been set as Output status, there are LTP, HTP, Zero, Single and RDM
these 5 modes can be selected.
Zero means the port output should be “0’;
Single means this port will only output one universal.
LTP means this port will output the latter one between the universal of principle
and secondly. The unit will compare the two universal and resend the later one
to the network.
Please note that in the LTP mode, you should ensure the Resend option
is not at the status of Disabled. Or it won’t resend the data to the network.
HTP means the port will output the one with higher value between the
universal of principle and secondly. The unit will compare the two universal and
resend the higher data to the network. They can be set within the range of
0.0-F.F./001-255. (These two formats can be change through Display Mode)