ACME Butterfly quard, Руководство пользователя

Страница: 6 / 20

5A
5 . DMX IN/OUT:
For DMX512 linking, use 5-­‐pin XLR cables to link the units together;
6. Microphone:
Used to receive music for the sound activation;
7. Function Display:
Shows the various menus and the selected functions.
8. Button:
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
9. LED:
DMX
On DMX input present
MASTER
On Master Mode
SLAVE
On Slave Mode
SOUND
Flashing Sound activation
3.2 Main Function
To select any functions, press the MENU button until the required function is showing on the
display. Select the function by pressing the ENTER button and the display will blink. Use the
DOWN and UP buttons to change the mode. Once the required mode has been selected, press
the ENTER button to setup. To go back to the functions without any changes press the MENU
button again. Press and hold the MENU button for about one second or wait for about one
minute to exit the menu mode.
The main functions are shown below: