ACME ANIMA C, Руководство пользователя, Страница: 9 / 28

DMX Settings
To select DMX Settings, press the ENTER button to confirm, use the UP / DOWN button to select
DMX Address, Channel Mode, No DMX State or View DMX Value.
DMX Address
To select DMX Address , press the ENTER button to confirm. Use the UP / DOWN button to adjust the
address from 001 to 405/498/502/510 , press the ENTER button to store. Press the MENU button back
to the last menu or let the unit idle 30 seconds to exit menu mode.
Channel Mode
To select Channel Mode , press the ENTER button to confirm. Use the UP / DOWN button to select
Mode1(108), Mode2(15), Mode3(11) or Mode4(3) , press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle 30 seconds to exit menu mode.
No DMX State
To select No DMX State , press the ENTER button to confirm. Use the UP / DOWN button to select
Hold (fixture continues to obey the last command it received Via DMX if DMX signal stops),
Blackout (fixture blacks out if DMX signal stops), or Manual (the fixture will automatically read the
DMX value in the “Manual Test” menu for operation after selecting this mode), press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle 30 seconds to exit
menu mode.
View DMX Value
To select
View DMX Value
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to view
the DMX channel value. Press the MENU button back to the last menu or let the unit idle 30
seconds to exit menu mode.
Fixture Settings
To select Fixture Settings , press the ENTER button to confirm, use the UP / DOWN button to select
Dimmer Curve, Dimmer Speed or White Balance.
Dimmer Curve
To select Dimmer Curve , press the ENTER button to confirm. Use the DOWN / UP button to select
Linear, Square Law, Inv SQ Law
or
S Curve
, press the
ENTER
button to store. Press the
MENU
button
back to the last menu or let the unit idle 30 seconds to exit menu mode.
8B