ZoneScan II Field Installation Instructions
11 |
P a g e
return to ship mode (a slow flashing
red light on LEDs).
To redeploy the ZoneScan II Unit, proceed
to Step M above.
Repackaging
To repackage the unit:
I.
Disconnect yellow Gutermann
cable from logger and MTU.
II.
Disconnect carabiner from 6-foot
lanyard.
III.
Disconnect 6-foot lanyard from
top of logger.
IV.
Disconnect carabiner from
stainless steel sling under the lid
assembly.
V.
Disconnect boot from MTU by
loosening the sealing nut and
boot. Remove rubber washer.
VI.
Disconnect SMA antenna
connector from MTU.
VII.
Clean dielectric grease from
antenna cable and connector on
MTU.
