4. FUNCTION OF PANEL COMPONENTS
① "TUNE" dial
Fine tune with 10 turn precision pot approximately 4&1/2 octaves.
② "FREQ" selector
Three frequency ranges – with a little bit more than 2 octaves apart.
③ "EXP FM 1&2" knob
Two independent exponential type attenuators for CV signal input from
④ "FM1&2" jacks. When fully open the knob clockwise, it works the same as
1V /OCT.
④ "FM 1&2" input jacks
They are CV signal input jacks. Attenuated by ③ "MOD 1&2" knob.
⑤ "LIN FM AMOUNT" knob
This attenuator knob sets the amount of the signal input from the ⑬ "FM" jack.
⑥ "SYNC THRESHOLD" knob
It is possible to blend the type of oscillator sync continuously, No sync → Soft
sync → Hard sync. External source for sync function is input from ⑪ "SYNC"
jack. However, if you fully open the TRESHOLD knob clockwise, possibly no
sound will be output.
2
3
4
5
6
7
8
9
10
11
12
17
18
19
13
14
15
16
1
FIG.2
：
Front Panel
6
