4. FUNCTION OF PANEL COMPONENTS
①
“OUT LEVEL” knob
Output volume control for ③ “OUT” XLR sockets.
②
“IN 1” “IN 2” jacks
3.5mm audio inputs (mono) for AC coupled unbalanced signals. Typically, you
will enter the modular �inal audio outputs into these jacks. These audio signals
are converted to balanced signals and output from ③ “OUT” XLR sockets.
③
“OUT” XLR sockets
Unbalanced signals inputs from ② “IN 1” “IN 2” jacks are converted to the
balanced signals and output from these XLR sockets (male). The volume of the
outputs is adjusted by ① “OUT LEVEL” knob.
④
“IN LEVEL” knob
Adjusts the volume of the audio signal input from ⑥ “IN” XLR sockets.
⑤
“OUT 1” “OUT 2” jacks
Balanced audio signals input from ⑥ “IN” XLR sockets are converted to
unbalanced signals and output from these jacks.
For example, you can use these
output audio signals, such as sending them to the �ilter module of the modular
system.
2
3
4
5
6
7
8
9
10
11
12
13
14
1
FIG.2
：
Front Panel
6
