Acksys WLn-LINK-OEM-RJ, Руководство по оборудованию

Страница: 14 / 27

Page 14 / 26
DTUS066 rev A1 March 21, 2012
V.4
RJ CONNECTOR
LAN-Transformer RJ45 10/100/1000 BaseT
Only available with RJ version
It allows connecting a classical Ethernet cable ( cat 5e or cat 6 for 1000
BaseT)
V.5 P-ETH
HE10/HE13/HE14/Strip Male Header 2.54mm pitch, 2x5 pins
Only available with TTL version
- Compatible with HE10/HE13/HE14 Female Receptacle
(ex: SAMTEC Series BCS, BSW, ESQ, ESW...
ANTELEC Series APC104, FT2... )
This connector gives directly raw signals from the Ethernet PHY
component, without insulation. The PHY used on the WLn-LINK-OEM-
TTL is
88E1118 from Marvell.
These signals can be used to relocate a RJ45 Plug far away in your
system. The signals should be correctly insulated, routed with wires of
equal lengths and with a 100ohms differential impedance, especially
with long distance. You can see at the next page some examples of
insulation for these signals
You can also connected two PHY together by using two transformers
(using two times "Example 1", for each PHY)