Documentation ref DTUS075 rev A0 06/18/20
-8-
For WiFi and LAN interface setup click on relative menu on “PHYSICAL
INTERFACES” menu:
Set for each WiFi interface the following essential parameters:
The operating mode: 802.11 mode, radio channel (take care about
local legislation), SSID
WiFi security parameters (WEP, WPA, WPA-PSK, WPA2, WPA2-
PSK, SSID broadcast or not)
For more details consult Acksys WaveOS User Guide.
TROUBLESHOOTING AND LED DEFINITION
None of the LED indicators turn ON
Verify the power supply (voltage, cabling)
Verify the fuse F1
The WiFi link does not come up
Make sure that the Wireless parameters of the Client (case sensitive
SSID, 802.11 mode, radio channel and security) match those of the
AP
Check the radio conditions: distance between devices, placement of
antennas, interferences and obstacles to radio waves propagation
Try with all securities and encryption settings temporarily disabled
Try another radio channel
How to restore factory settings?
If the built-in web-based interface is reachable, you can use a browser
to restore factory settings.
Else, power up the unit, wait for the DIAG led to turn blue, then hold
down the reset button (for at least 2 seconds) until DIAG goes off.
Then release it and wait for the DIAG led to turn blue again, meaning
that the product rebooted with its factory settings.
