Acksys AirBox V1 Series, Быстрое руководство по установке

Страница: 30 / 36

-12-
Software
Device configuration
Automatic discover of the product
Built in web interface with
login/password protection
Firmware upgrade Via web browser or “WaveManager”
SNMP SNMP V2C, V3
Operating mode
AP (Access Point), Router, Repeater,
Bridge/Client, Mesh, WDS
AP mode only
Network topology Infrastructure
Security
WEP, WPA-PSK/WPA2-PSK, WPA/
WPA2 with 802.1x authenticator, SSID
visibility status
Client/Bridge mode only
Network topology Infrastructure, ad-hoc or mesh mode
Security
WEP, WPA-PSK, WPA2-PSK. 802.1x
supplicant. AES/TKIP/WEP by hardware
encryption
Mesh mode only (supported only with 11n WiFi interface)
Network topology 802.11s
Security SAE/AMPE
Power supply
Number of power supply inputs 2 (PWR1, PWR2)
Characteristics
9 to 48VDC (5.5W typ., 10W peak),
protected against wire inversion
Power consumption
Typical Max (peak)
AirBox/10 6 W 10 W
AirBox/12
AirBox/14
11 W 15 W
Connector 5-ways terminal block connector
Ethernet interface
Number of ports 2 (LAN1, LAN2)
Type of ports
Auto MDI/MDI-X
10 BASE T/100 BASE Tx/1000 BASE T
with automatic 802.3u negotiation
(HDX/FDX, 10/100/1000 Mbps)
Connectors RJ45
Cables
Ethernet CAT5e UTP, 2x RJ45
connector (straight cable T568B)
Digital inputs
Number of DIO 2 / IN1, IN2
Type Opto-isolated
Tension max 24VDC, protected against over-voltage
Isolation 1500V
Connector 8-ways terminal block connector
Digital outputs (Alarm contact)
Number of DIO 2 / OUT1, OUT2
Type
Solid state relay 1 form A (normally
open)
Max voltage
60VDC, not polarized, protected against
transient over-voltage
Max load current 80mA
ON-Resistance 25 ohms typ., 35 ohms max
Isolation 1500V
Connector 8-ways terminal block connector