ACKERMANN 16-2000-120 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 39

ACKERMANN 16-2000-120 Скачать руководство пользователя страница 10

USER MANUAL 16-2000-120

Rev. 02/2016

5. ACCESSORIES FOR ELECTROSURGICAL PROCEDURES

Ackermann only allows the use of Ackermann accessories or those available in the catalogue of
the our company.

In case of doubts concerning the authorisation of a given accessory and the manner of
connecting it, please contact the manufacturer or a distributor.

Ackermann offers high-quality electrosurgical accessories to be used with the Line 16-2000-120, enabling the
implementation of surgical, gynaecological, dental and other procedures.

The maximum voltage of active accessories should be checked before they are connected to
the unit. The operating voltage of the accessories should not be lower than the maximum
output voltage of the unit.

5.1. NEUTRAL ELECTRODE CABLE

disposable neutral electrode plug

reusable neutral electrode plug

The connection sockets of the

neutral electrode output (Fig. 4, item 3):

For more information on the neutral electrode, see section 8.3 “Neutral
electrode monitoring”.

5.2. INSTRUMENT CABLE FOR UNIVERSAL ASD SOCKETS

universal ASD plug

The universal outputs with automatic instrument detection are made
according to the Ackermann Smart Detection standard (Fig. 4, item 4 and
5).

PAGE 10

OF 39

«
...
8
9
10
11
12
...
»

Содержание 16-2000-120








































Отзывы:

Нет отзывов