14
JUNIOR / JUNIOR PRO - ALVÉO’NOX - NEW JET VAG - PRO LUXE - LUM JET VAG
STEP 3
Continuing to work above the water level, connect the air tube to the pushbutton, and then
position the front panel by pulling the excess length of cable and tube gently from the top. Place
the 3 screws on the front panel.
STEP 4
A heat 2 connectors are also provided for sealing electrical cables connecting the front
panel to the control box. Connect the electrical cable of the front panel with an electrical cable
2x0.75mm ², unshielded, to connect the control box (12V output) using the 2 connectors, cover
the whole of the shrink sleeve, heat with a «hot air generator «so that the sheath will shrink and
make the seal. The air tube is also connected to the control box.
The extra tube pneumatic and electrical cable (the part with the shrink tubing) should be stored
in the box.
sleeving
electrical
cable
