Installation and Operation Instructions
WH2630AR/P, WT2630AR/P,
& BR/P Wireless
Humidity and Temperature Wall Sensors
AUTOMATION COMPONENTS, INC Version : 4.0
2305 Pleasant View Road I0000685
Middleton, Wisconsin 53562
Page 1 of 4
4.25"
(107.95mm)
2.625"
(66.68mm)
1.26"
(32mm)
1.26"
(32mm)
General Description
The WH2630 and WT2630 are battery operated spread spectrum wireless wall humidity temperature sensors
housed in a rugged enclosure.
ACI’s mesh network Series 2000 wireless sensors utilize reliable Spread Spectrum Radio technology. They can
be installed easily in minutes eliminating hundreds of feet of wire and saving installation cost while reducing
installation labor risks.
The Series 2000 sensor Data-Link LED confirms the data transmission was received by the receiver for fast and
reliable positioning of the sensor during installation.
There is no need for special wireless installation equipment
or tool.
Together with the ACI Series 2000 receivers and controllers, the ACI wireless sensors can be used with any
LON, BacNet, MODbus, or DDC control system or panel.
The maximum radio transmission distance is dependent on the building type. The maximum open air
transmission distance is one mile. In a typical commercial building with steel I-Beam construction, concrete
floors with reinforcing rod, and metal stud walls, it can be expected that transmissions will penetrate vertically
through floors and horizontally through 200 to 300 feet of walls, furniture and air.
