4
OVERVIEW
After the Switch Control (receiver) is installed, the remote control may be setup. The
remote control provides wireless push-button control. The remote is simple to use and
provides convenient, reliable operation and is suitable for a wide variety of applications.
NOTE:
Only Switch Controls with rotary switches are compatible with wireless remote
controls, Switch Controls without rotary switches are incompatible with wireless remote
controls.
1. SET WIRELESS OPERATING MODE
A rotary switch inside the Switch Control configures the operating mode (how the
Remote and Switch Control operate the tarp).
!
CAUTION: Setting operating mode
requires turning a rotary switch inside the
Switch Control near power wires. Avoid
touching power wires.
A. Open Switch Control and locate rotary
switch. Turn the switch to the desired setting:
Switch setting 4
(latching mode): Pressing
and releasing Open/Off or Close/On on the
remote control causes the tarp to fully open
or close. Or pressing and releasing the switch
on the control box causes the tarp to open or
close.
Switch setting 7
(momentary mode):
Pressing and holding Open/Off or Close/On
on the remote control causes the tarp to open
or close. Or pressing and holding the switch
on the control box causes the tarp to open or
close.
Rotary switch
NOTE:
The switch's flat slot indicates which
switch position is enabled.
B. Disconnect power cables from the battery.
C. Reconnect power cables to the battery.
Program
LED
Rotary
switch
