background image

PRODUCT SPECIFICATIONS

Automation Components, Inc.

2305 Pleasant View Road  |  Middleton, WI 53562

Phone:

 1-888-967-5224  |  

Website:

 workaci.com

Page 7

Version: 15.0

I0000777

4-20 mA Output:

 16-36 VDC (250 Ω Load max.) / 22-36 VDC (500 Ω Load max.)

0-5 VDC / 0-10 VDC Output:

 16-36 VDC / 24 VAC (+/- 10%)

4-20 mA Output: 24 mA minimum | 0-5 VDC / 0-10 VDC Output: 6 mA maximum

Current Output:

 4-20 mA, 2-Wire (Standard); (Current limited to 21.4 mA max)

Voltage Signals:

 0-5 VDC / 0-10 VDC, 3-Wire; Output limited @ 5.25 & 10.5 VDC)

8 seconds
1 second
+/- 0.5% FSO; +/- 0.25% (Only for Specified Range)
Pushbutton Zero Function
+/- 0.067% FSO / °F (0.12% FSO / °C)

A/DLP-001:

 Proof: 270 inWC (67.2 kPa) | Burst: 415 inWC (103.3 kPa) for 1 inWC (249.8 Pa)

A/DLP-010:

 Proof: 350 inWC (87.12 kPa) | Burst: 550 inWC (136.9 kPa) for 10 inWC (2490.8 Pa)

A/DLP-040:

 Proof: 562 inWC (140 kPa) | Burst: 1004.7 inWC (250 kPa) for 40 inWC (9963.6 Pa)

-4 to 185 °F (-20 to 85 °C)
32 to 122 °F (0 to 50 °C)
-22 to 185 °F (-30 to 85 °C)
10 to 95% RH, non-condensing
Dry air or inert non-conductive gases
Flame Retardant Polycarbonate; UL94-5VA
Finger Pushbutton (Spring) Terminal Blocks; accepts 16-24 AWG wires
Watertight Cordgrip Installed (1/2" NPT Conduit fittings accepted when Cordgrip removed)
Nickel Plated Brass or Stainless Steel
1/4" O.D. x 0.170" I.D. Poly Tubing

SPECIFICATIONS

Supply Voltage:

Supply Current:
Output Signals:

Response Time (0-100% FSO):
Output Update Rate:
Accuracy¹:
Zero Function:
Thermal Effects²:
Proof Pressure / Burst Pressure³:

Operating Temperature Range:
Compensated Temperature Range:
Storage Temperature Range:
Operating Humidity Range:
Media Types:
Enclosure Material / Flammability Rating:
Wiring Connections:
Conduit Knockouts:
Pressure Fitting Material:
Tubing Size Accepted:

W.E.E.E. DIRECTIVE 

At the end of their useful life the packaging and product should be disposed of via a suitable recycling 
centre. Do not dispose of with household waste. Do not burn.

WARRANTY

The ACI DLP is covered by ACI’s Five (5) Year Limited Warranty, which is located in the front of ACI’S 
SENSORS & TRANSMITTERS CATALOG or can be found on ACI’s website: www.workaci.com.

Note

:  Accuracy includes linearity, hysteresis & repeatability @ 71°F (21.5°C)     

Note

:  Shift is relative to 71°F (21.5°C)

Содержание ACCESS series








Отзывы: