Automation Components, Inc.
2305 Pleasant View Road | Middleton, WI 53562
Phone:
1-888-967-5224 |
Website:
workaci.com
Page 5
Version: 6.0
I0000558
PRODUCT SPECIFICATIONS
AC Current
600 VAC
50/60 kHz
Solid-Core and Split-Core Versions available (See Ordering Grid)
Induced from the Monitored Conductor (Insulated Conductors only)
See Ordering Grid
2200 VAC
Adjustable Trip Point | See Ordering Grid
10% Trip Point, typical
Normally-Open “N/O”
1A Continuous @ 36 VAC/VDC
< 0.5 Ohms (tripped) | > 1 Meg Ohms (Open)
A/MCS-A:
< 90 mS typical |
A/MSCS-A:
< 45 mS typical
Red LED (Current above trip point) | Blue LED (Current below trip point)
0.53” (13.46 mm)
-22 to 140ºF (-30 to 60ºC)
0 to 95%, non-condensing
2 Position Screw Terminal Block (Not Polarity Sensitive)
16 to 22 AWG (1.31 mm2 to 0.33 mm2) Copper Wires only
4.43 to 5.31 in-lbs. (0.5 to 0.6 Nm)
1” (2.6 cm) between current switch (Relays, Contactors, Transformers)
SENSOR NON-SPECIFIC INFORMATION
Monitored Current Type:
Maximum AC Voltage:
Operating Frequency Range:
Core Style:
Sensor Power:
Amperage Range:
Isolation Voltage:
Trip Point Style | Trip Point:
Hysteresis:
Contact Type:
Contact Rating:
Contact “On” Resistance | “Off” Resistance:
Response Time:
Status LED Indication:
Aperture Size:
Operating Temperature Range:
Operating Humidity Range:
Wiring Connections:
Wire Size:
Terminal Block Torque Rating:
Minimum Mounting Distance¹:
STANDARD ORDERING
Model #
A/MCS-A
A/MSCS-A
Item #
117854
117855
Trip Point Type
Adjustable
Adjustable
N/O
•
•
Solid-Core
•
Split-Core
•
Amp Range
0.32 to 150A
0.70 to 150A
Amp Range
0.32 to 150A
0.70 to 150A
Contact Rating
1A @ 36 VAC/VDC
1A @ 36 VAC/VDC
Note¹:
The LED should not be used to determine if current is present. At low currents the LED may not be visible.
