manualshive.com logo in svg

Achronix Speedster7t GDDR6, Руководство пользователя, Страница: 30 / 39

Поделиться
Скачать
Achronix Speedster7t GDDR6 Скачать руководство пользователя страница 30

Speedster7t GDDR6 User Guide (UG091)

www.achronix.com

30

Pin Name

Direction

Width

Description

gddr6_*_chan0/1_awsize

Input

3

Input signal to set the burst size. This signal indicates the size of 
each transfer in the burst.

gddr6_*_chan0/1_awburst

Input

2

Input signal to set the burst type. The burst type and the size 
information determine how the address for each transfer within 
the burst is calculated.

gddr6_*_chan0/1_awlock

Input

2

Input signal to set the lock type. It provides additional information 
about the atomic characteristics of the transfer.

gddr6_*_chan0/1_awcache Input

4

Input signal to set the memory type. This signal indicates how 
transactions are required to progress through a system.

gddr6_*_chan0/1_awprot

Input

3

Input signal to set the protection type. This signal indicates the 
privilege and security level of the transaction, and whether the 
transaction is a data access or an instruction access.

gddr6_*_chan0/1_awvalid

Input

1

Input signal to set the write address valid. This signal indicates 
that the channel is signaling valid write address and control 
information.

gddr6_*_chan0/1_awready

Output

1

Output signal that indicates write address ready. This signal 
indicates that the slave is ready to accept an address and 
associated control signals.

gddr6_*_chan0/1_awqos

Input

3

Input signal to set the QoS identifier, sent on the write address 
channel for each write transaction.

gddr6_*_chan0/1_wid

Input

7

Input signal to set the write ID tag. This signal is the ID tag of the 
write data transfer.

gddr6_*_chan0/1_wdata

Input

256

256-bit wide write data input signal.

gddr6_*_chan0/1_wstrb

Input

32

Input signal to set the write strobes. This signal indicates which 
byte lanes hold valid data.

gddr6_*_chan0/1_wlast

Input

1

Input signal to set the write last. This signal indicates the last 
transfer in a write burst.

gddr6_*_chan0/1_wvalid

Input

1

Input signal to indicate if the write data channel signals are valid.

gddr6_*_chan0/1_wready

Output

1

Indicates that a transfer on the write data channel can be 
accepted.

gddr6_*_chan0/1_bid

Output

7

Identification tag for a write response.

gddr6_*_chan0/1_bresp

Output

2

Write response output signal that indicates the status of a write 
transaction.

Содержание Speedster7t GDDR6








































Отзывы:

Нет отзывов