achilles A23S, Руководство пользователя

Страница: 38 / 94

29
CONTROL OBSERVATIONS DURING
OPERATION
 Stop the Engine immediately if:

Sudden increase or decrease in engine
rpm's occurs.
 Sudden abnormal noises occur.
 Exhaust gases turn suddenly very dark.
Make following control observations during
operation to be sure that everything
functions normally.
RUNNING-IN OF THE NEW
EXCAVATOR
The operation and care of the new excavator
influences its life span. Your new excavator
has been carefully checked and tested
before leaving the factory. In spite of this,
all movable components must run-in during
the first 50 work hours. Do not work with full
engine rpm's and full loads during this
period. It is most important to run-in your
excavator properly in order to achieve its
full performance and longevity. During the
running-in, the following points should be
adhered to in all cases.
 Do not Work with Full Engine
Rpm's or Full Loads during the
First 50 Working Hours

Let the engine warm up sufficiently in
the cold season.
 Do not let the engine rev-up more than
necessary.
 Oil Change in the Run-in Stage
The lubrication oil plays a specific and
important role during the run-in phase of the
excavator. The numerous movable parts are
not yet run-in, so many fine metal particles
are generated and cause damage and
shorten the lifetime of many components.
Pay attention to the oil-change intervals
and complete them sooner than later.
See the subject "REGULAR CHECKS AND
MAINTENANCE WORK" for more details on
the oil-change intervals.

Seat Belt
WARNING
To avoid personal injury or death:
 Always use the seat belt with
a
ROPS/FOPS protection
structure. Adjust the seat to the
optimal position and buckle up.
(1) Seat belt
STARTING
CAUTION
To avoid personal injury:

No persons, other than those
familiar with the excavator, are
allowed to use the excavator.

Do not allow any person other
than the operator to ride on the
excavator.
EXCAVATOR OPERATION
3
3