Achiever WHISTLER, Руководство пользователя

Страница: 14 / 44

2013 © Fanciteck International Ltd. All rights reserved. Page 12
2. Unscrew the lock nut from the quick release skewer, remove
outer spring and slide the skewer through the front wheel
axle so that the handle is on the left side of the bike (the
side opposite the chain).
3. Install the spring and then start to thread the lock nut back
onto the skewer, but do not tighten too far.
4. Put the wheel into the fork wheel slots and be sure that the
wheel is centered.
5. There’s an “open” and a “closed” position. Move the handle
so it is in the “open” position. With one hand on the handle
and one hand on the lock nut, start to hand tighten the lock
nut until you start to feel some resistance with the fork.
6. Try to close the handle. If it closes easily, open it up, and
tighten the lock nut further. If it is too difficult to close, open
the handle up, and loosen the lock nut a little and try again.
7. The quick release handle should be a little bit difficult to
push closed with your palm, but should be possible. Practice
opening and closing the handle until you feel comfortable.