off. It displays “
HI and a flashing number of voltage” to be set, “HI”
means battery warning on voltage – when the voltage is exceeded the
LED will come on, setting range from 14.0 to 17.0V“. Follow the item 2
of button operation to finish the voltage warning setting and jump to
thermometer 1 setting.
14.
It displays "
℃
,
℉
or HI, or oFF", each press of RESET button
converts
℃
,
℉
, oFF or HI, the temperature bars will disappear when
you select oFF or HI mode; press MODE button to confirm temperature
setting and jump to temperature warning setting.
15.
It displays "
XXX" and the selected unit. Follow the item 2 of button
operation to finish the temperature warning setting and go to
bar fuel or
bar temperature
setting.
16.
It displays “on, oFF or rES” and , it displays fuel tank and full bars as
well flash XXXXr, it means full tank resistance setting, the setting range
of “on” from 10r to 1000r. It displays fuel tank and one bar as well as
flash XXXXr, it means empty fuel sensor resistance setting. Follow the
item 2 to select a resistance same as your fuel sender and jump to
odometer setting. The fuel meter bar will disappear if you select oFF or
rES mode and the thermometer setting set at “oFF”; it will display in
case the thermometer set “on or oFF”, bar-thermometer will be displayed
instead of bar-fuel gauge at the status. In “rES” mode connecting the
input wire to 0v can bring on the fuel symbol instantly.
17.
It displays “ODO & 00000X km”, the “X” is from odometer testing in
factory, follow item 2 to set a desired odometer value and jump to clock
setting or return to Normal Mode. This setting screen will disappear
when the odometer is over 30km (18.6Miles) or your setting is over
30km
