CONTENTS
PART 1
BRIEF INTRODUCTION
Thank you for choosing our general purpose gasoline engine.
*
Single Cylinder, 4 stroke, Forced Air Cooled
*
OHV
*
TCI Ignition Method
*
Splash Lubricated
Proper use and regular maintenance of the engine will assure it not only
always in normal and reliable condition but also an extended life span.
Please read this manual carefully before use, and master the correct methods
and tips of operation and maintenance.
Precations: Not following the notes and safety precautions listed below may
result in personal injury or severe engine damage. Please pay close attention
to the following:
1.Coupling the engine with equipment should be strictly in accordance with
the rated power output noted in the engine nameplate. Operating with
overload, at excessive rpm, or under sustained low load and low rpm are
forbidden.
2.Only use specific fuel and lube oil.Be sure to deposit and filter them fully
before use. Keep oil filters clean and change lube oil regularly. Carefully
check fuel pipe and joints for looseness and fuel leakage. Leaking fuel
creates a potentially dangerous situation.
3.Check periodically all the bolts and nuts for looseness. A loose bolt or nut
may cause serious engine trouble.
4.Clean regularly the air cleaner element and change it if necessary.
5.Clear away dirt and contaminant on the cooling fins, fan and fan cover
timely to ensure the engine's normal cooling effect.
Notes:
PART 1 BRIEF INTRODUCTION
PART 2 PREPARATION BEFORE OPERATION
PART 3 STARTING AND STOPING OF ENGINE
PART 4 DAILY MAINTENANCE
PART 5 TROUBLESHOOTING
PART 6 DISMANTLEMENT AND ASSEMBLY
01
03
05
09
11
16
PART 7 LABEL EXPLANATION
19
01
