Acesonic KOD-3000, Руководство пользователя

Страница: 33 / 53

33
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you suspect that something is
wrong with the unit, check the list below for sometimes the troubles lie within another component.
Remember to try inspecting other components and electrical appliances in use. If the trouble cannot
be rectified even after exercising the steps listed below, contact Acesonic at +1-626-820-0645 to
inquire about repairs.
Reset to factory settings

Resetting the unit to factory defaults will likely solve more than 90% of problems encountered.
1. Remove any disc from the disc tray.
2. Power the unit down then back up using the rear Power Switch (not the Power Button or the
remote).
3. Power the unit back up using the Power Switch and turn the unit ON using the Power Button.
4.
Restore the factory settings through the Preferences Menu.
1. General Setting
2. System
3. Load Default
4. Yes
The disc automatically ejects back out when the disc tray is closed

Dirty or warped disc.

The disc was not seated properly in the disc tray.

Region number on the disc does not conform to the unit.
Cannot execute disc playback

Condensation has formed inside the player.
Disc playback stops

Press the STOP BUTTON on the remote.

Press the PLAY BUTTON on the remote to restart playback.
Picture disturbance during playback

The player is compatible with Macro-Vision System copy guard. Some discs include a copy
prevention signal, and when this type of disc is played back, stripes, etc may appear on some
sections of the picture depending on the TV. This is not a malfunction.
When recorded or copied there is a disturbance in the playback picture

This player is compatible with copy prevention technology. Some discs include a copy
prevention signal and the copy guard system will prevent proper playback.
Improper operation of TV set occurs

Some TVs that have wireless remote functions may not operate properly with this remote
control.