acerpure pro Series, Руководство пользователя

Страница: 8 / 48

8
3s
3s
Power ON/OFF
You can start or stop using this product.
*The anion function is released at the same time when the air
purifier is powered on.
Wi-Fi functions
Before product registration: Press and hold down
the power button for more than 3 seconds to
activate the Wi-Fi product registration mode.
Reset and disable: After enabling Wi-Fi, press and
hold the power button for more than 3 seconds to
reset and disable Wi-Fi.
Purifier Speed
This product has a total of four stages of purifier
speeds (Smart Mode, Low, Middle, High, and Turbo
Mode), you can adjust the purifier strength of this
product according to your needs.
*Smart Mode: The purifier speed strength (low, middle and high)
is adjusted automatically based on the air quality status (green
light, yellow light, red light).
Lock Function
Press and hold down the purifier speed button for 3
seconds to enable the lock function; press and hold it
down for 3 seconds again to cancel the lock function.
Off Timer
You can preset the product to shutdown automatically after 1
hour, 2 hours, 4 hours,8 hours, and 12 hours.
Quiet mode
Press and hold down the off timer button for 3 seconds to
enable sleep mode; press and hold it down for 3 seconds
again to cancel quiet mode.
*Please note that after quiet mode is enabled, the display panel of this
product will go off automatically after 15 seconds, and the touch panel
will also be in silent mode.
Turning off the Filter Replacement
Indicator
When the filter of this product needs to be replaced, the filter
replacement indicator of this product will light up
automatically; after replacing the filter, press and hold down
the power button, and the purifier wind speed button
simultaneously for 3 seconds to turn off the filter replacement
indicator.
＋
Operating Air Quality Display
The initial value displayed on the panel of this product is
PM2.5,by using this button on the remote control, it can switch
to display the PM1.0 value, and pressing it for a second time will
switch off the air quality display panel.
Function Buttons