Chapter 2
20
Power Management Setup
Parameter
Description
Option
ACPI Aware O/S
Enables or disables the Advanced Configuration and Power
Management (ACPI) function.
Enabled
Disabled
ACPI Suspend Mode
Select an ACPI state.
S3 (STR)
S1 (POS)
Deep power off mode
Select the Deep power off Mode
Enabled
Disabled
Power On by RTC Alarm
Enables or Disables to wake up the system by RTC Alarm Function
Enabled
Disabled
Power On by PCIE Devices
Enables or disables to wake up the system from a power saving mode
through an event on PCI Express device.
Enabled
Disabled
Power On by Onboard LAN
Enables or Disables to wake up the system by Onboard Lan function
Enabled
Disabled
Wake Up by PS/2 KB/
Mouse
Enables or disables to wake up the system from a power saving mode
using a PS2 keyboard or mouse.
Enabled
Disabled
Wake Up by USB KB/
Mouse
If enabled, press any key or click the mouse will wake system from S1/
S3 state.
Enabled
Disabled
Restore On AC Power Loss
Enables or disables the system to reboot after a power failure or
interrupt occurs.
Power Off
Power On
Last State
Содержание Veriton X2110
