
17
Chapter 2
Advanced BIOS Feature
Quick Boot
Allows you to decrease the time it takes to boot the computer by shortening
or skipping certain standard booting process.
Enabled
Disabled
Quiet Boot
When enabled, the BIOS splash screen displays during startup.
When disabled, the diagnostic screen displays during startup.
Enabled
Disabled
1st/2nd/3rd/4th Boot Device
Specifies the boot order from the available devices.
Hard Disk
CD^DVD
Removable
Device
LAN
Hard Disk Drive Priority
Press
Enter
to access the Hard Disk Drive Priority submenu and specify the boot device
priority sequence from available hard drives.
Optical Disk Drive Priority
Press
Enter
to access the Optical Disk Drive Priority submenu and specify the boot device
priority sequence from available optical drives.
Removable Device Priority
Press
Enter
to access the Removable Device Priority submenu and specify the boot device
priority sequence from available removable drives.
Network Drives Priority
Press
Enter
to access the Network Drive Priority submenu and specify the boot device priority
sequence from available network drives.
Bootup Num-Lock
This item defines if the keyboard Num Lock key is active when your system
is started.
On
Off
Boot Sector Virus Protection
If set to Disabled, when anything attempts to access the boot sector or hard
disk partitiontable, there will be no warning message to appear.
Disabled
Enabled
USB Beep Message
Enables or disables BIOS to display error beeps or messages during USB
device enumeration.
Disabled
Enabled
Содержание Veriton X2110
