Acer Veriton M4610 Скачать руководство пользователя страница 11

Страница: 11 / 120

Chapter 1

•

3.5” SATA/SATAII/SATAIII HDD

•

Combo/ DVD supermulti/Blue-ray DVD ODD

•

AHCI/IDE mode option

•

Default AHCI mode.

LAN

•

Controller: Intel 82579LM co-lay Gbt LAN controller/PHY.

•

RJ-45 Back panel port with Link/Activity LEDs.

•

Need support Wake up on LAN function, including from S3,S4,S5,S3->S5, power button off (non-ACPI
OS).

•

Need support Wake up on LAN function and ASF 2.0.

Audio

•

Chip : HD audio codec ALC662-VC HD codec 5.1

•

Connectors support:

•

Rear 3 jack follow HD audio definition (ALC662-VC).

•

Audio jacks color coding: should meet Microsoft Windows Logo Program Device Requirements:
Audio-0002.

•

1 front panel audio header (2*5).

•

1 internal speaker header (2*4).

•

S/N ration: 90dB at rear output jack.

•

1 front panel audio header (2*5).

•

Follow Acer Audio spec v4.1 & audio C/R should support Acer Internal speaker spec.

•

BIOS should meet MS Pin Configuration Guidelines for High Definition Audio Devices.

•

One earphone and one microphone jack is required on front bezel.

•

3 HD audio plugs on rear panel.

•

One 4*1 SPDIF internal header closed to PCIEx16 slot.

•

Auto detection and re-tasking behavior is following Acer Audio Jack spec.

USB ports

•

Controller: 6 Series Express Chipset (Cougar Point)

•

Ports Quantity: 14

•

6 back rear ports(USB2.0 * 6 ports)

•

On-board: 4 2*5 headers ( 8ports)

•

4 ports for front daughter board

•

4 ports reserved

•

Connector Pin: standard Intel FPIO pin definition

•

Data transfer rate support:

•

USB 2.0/1.1

•

All USB ports must be boot-capable includes USB-ODD, USB-HDD, USB-FDD, and etc…

•

All USB ports must provide the over current protection.

•

The pin connector should be located on upper if Virginia is placed on horizontal.

•

Enable the USB EHCI Debug Ports

FDD

•

Slot Quantity: 1

•

Design Criteria:

Содержание Veriton M4610

























































































































Результаты поиска

Содержание Veriton M4610

Отзывы:

Бренды по названию

Популярные бренды

Acer Veriton M4610, Руководство по обслуживанию

Результаты поиска

Содержание Veriton M4610

Отзывы:

Бренды по названию

Популярные бренды