Acer Veriton Hornet N260G, Руководство по обслуживанию

Страница: 60 / 99

54
ATAPI
Incompatible
failed an ATAPI compatibility test. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
S.M.A.R.T.
Capable but
Command Failed
The BIOS tried to send a S.M.A.R.T. message to a hard disk, but the
command transaction failed.
This message can be reported by an ATAPI device using the S.M.A.R.T.
error reporting standard. S.M.A.R.T. failure messages may indicate the
need to replace the hard disk.
S.M.A.R.T.
Command Failed
The BIOS tried to send a S.M.A.R.T. message to a hard disk, but the
command transaction failed.
This message can be reported by an ATAPI device using the S.M.A.R.T.
error reporting standard. S.M.A.R.T. failure messages may indicate the
need to replace the hard disk.
S.M.A.R.T. Status
BAD, Backup and
Replace
A S.M.A.R.T. capable hard disk sends this message when it detects an
imminent failure.
This message can be reported by an ATAPI device using the S.M.A.R.T.
error reporting standard. S.M.A.R.T. failure messages may indicate the
need to replace the hard disk.
S.M.A.R.T.
Capable and
Status BAD
A S.M.A.R.T. capable hard disk sends this message when it detects an
imminent failure.
This message can be reported by an ATAPI device using the S.M.A.R.T.
error reporting standard. S.M.A.R.T. failure messages may indicate the
need to replace the hard disk.
Virus Related
Message
Displayed
Description
BootSector
Write !!
The BIOS has detected software attempting to write to a drive’s boot sector.
This is flagged as possible virus activity. This message will only be displayed
if Virus Detection is enabled in AMIBIOS setup.
VIRUS:
Continue
(Y/N)?
If the BIOS detects possible virus activity, it will prompt the user. This
message will only be displayed if Virus Detection is enabled in AMIBIOS
setup.
System Configuration
Message Displayed Description
DMA-1 Error Error initializing primary DMA controller. This is a fatal error, often
indication a problem with system hardware
DMA-2 Error Error initializing secondary DMA controller. This is a fatal error, often