52
POST.
Secondary Slave
Hard Disk Error
The IDE/ATAPI device configured as Secondary Slave could not be
properly initialized by the BIOS. This message is typically displayed
when the BIOS is trying to detect and configure IDE/ATAPI devices in
POST.
3rd Master Hard
Disk Error
The IDE/ATAPI device configured as Master in the 3rd IDE controller
could not be properly initialized by the BIOS. This message is typically
displayed when the BIOS is trying to detect and configure IDE/ATAPI
devices in POST.
3rd Slave Hard
Disk Error
The IDE/ATAPI device configured as Slave in the 3rd IDE controller
could not be properly initialized by the BIOS. This message is typically
displayed when the BIOS is trying to detect and configure IDE/ATAPI
devices in POST.
4th Master Hard
Disk Error
The IDE/ATAPI device configured as Master in the 4th IDE controller
could not be properly initialized by the BIOS. This message is typically
displayed when the BIOS is trying to detect and configure IDE/ATAPI
devices in POST.
4th Slave Hard
Disk Error
The IDE/ATAPI device configured as Slave in the 4th IDE controller
could not be properly initialized by the BIOS. This message is typically
displayed when the BIOS is trying to detect and configure IDE/ATAPI
devices in POST.
5th Master Hard
Disk Error
The IDE/ATAPI device configured as Master in the 5th IDE controller
could not be properly initialized by the BIOS. This message is typically
displayed when the BIOS is trying to detect and configure IDE/ATAPI
devices in POST.
5th Slave Hard
Disk Error
The IDE/ATAPI device configured as Slave in the 5th IDE controller
could not be properly initialized by the BIOS. This message is typically
displayed when the BIOS is trying to detect and configure IDE/ATAPI
devices in POST.
6th Master Hard
Disk Error
The IDE/ATAPI device configured as Master in the 6th IDE controller
could not be properly initialized by the BIOS. This message is typically
displayed when the BIOS is trying to detect and configure IDE/ATAPI
devices in POST.
6th Slave Hard
Disk Error
The IDE/ATAPI device configured as Slave in the 6th IDE controller
could not be properly initialized by the BIOS. This message is typically
displayed when the BIOS is trying to detect and configure IDE/ATAPI
devices in POST.
Primary Master
Drive - ATAPI
The IDE/ATAPI device configured as Primary Master failed an ATAPI
compatibility test. This message is typically displayed when the BIOS is
Содержание Veriton Hornet N260G
