![background image](http://html.mh-extra.com/html/acer/veriton-3700g/veriton-3700g_service-manual_6282046.webp)
Chapter 2
40
The following table describes the parameters found in this menu.
NOTE:
In ACPI mode: Valid-S5 and S4. In APM mode: Valid- shutdown
Parameter
Description
Options
ACPI Suspend Type
This item specifies the power saving modes for
ACPI function. Options are:
S1/POS
: The S1 sleep mode is a low power
state. In this state, no system context is lost
(CPU or chipset) and hardware maintains all
system context.
S3/STR
: The S3 sleep mode is a lower power
state where the information of system
configuration and open applications/files is
saved to main memory that remains powered
while most other hardware components turn off
to save energy. The information stored in
memory will be used to restore the system
when a “wake up” event occurs.
S1/POS
S3/STR
USB Device Wakeup From S3/S4
S3- suspend to RAM. Consumes less power,
but some drivers may not support this state.
S4 is Suspend to Disk.
Enabled
Disabled
CPU Throttling
The item allows you to specify the CPU speed
(at percentage) to which it will slow down when
the CPU reaches the predetermined overheat
temperature.
75%
50%
25%
Restore on AC Power Loss
To setting the PC should power on or stand off
when the power resume.
Last State
Power Off
Power On
Wake-Up by LAN
These fields specify whether the system will be
awakened from power saving modes when
activity or input signal of the specified hardware
peripheral or component is detected.
Disabled
Enabled
Wake-Up by PCI PME
These fields specify whether the system will be
awakened from power saving modes when
activity or input signal of the specified
hardware peripheral or component is detected.
Disabled
Enabled
Resume by Alarm
Use this option to set the date and time for your
computer to boot up.
Date (of month) Alarm
*
- Indicate month when
system will boot up. Set it to 0 if you want to
boot everyday.
Time (hh:mm:ss) Alarm
*
- Indicate the hour,
minute and second when system will boot up.
Disabled
Enabled
*
Set Resume by Alarm to
Enabled, then press
e
to
show the range of Date and Time
Alarm.
Содержание Veriton 3700G
