Acer TravelMate 620 Series, Руководство по обслуживанию

Страница: 43 / 112

Chapter 2 35
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings
.
Setting the Boot Drive Sequence
The Boot Drive Sequence section lists boot priorities (1st, 2nd, 3rd and 4rd ) for bootable drives in your
computer.
For example, the default value (1st: Floppy Disk, 2nd: CD-ROM, 3rd: Hard Disk) tells the computer to first
search for a bootable floppy disk in the floppy drive. If it finds one present, it boots up from that floppy disk. If
not, the computer continues to search for a bootable CD-ROM in the CD-ROM drive. If it cannot boot up from
the CD-ROM drive, it continues by booting up from the hard disk.
To set the boot drive sequence, use the
w
w w
w
/
y
y y
y
keys to select a priority level (1st, 2nd, 3rd and 4rd), then use
the
z z z z
/
x x x x
keys to select the device for that priority level.
Parameter Description Options
Boot Display Sets the display device on boot-up.
When set to Auto , the computer automatically
determines the display device when the computer
starts up. If an external display device (e.g., monitor)
is connected, it becomes the boot display. When set
to
Both
, the computer outputs to both the computer
display screen and an external display device if one is
connected.
Both or Auto
CPU Serial Number Enable or Disable CPU Serial Number Feature.
If enabled, user may read CPU serial number via
necessary utility. If disabled, user cannot read it. But
on the model equipped with Celeron CPU which does
not support CPU Serial Number feature, this option
should be invisible.
Enabled or Disabled
Screen Expansion Expand the screen on the graphic/text mode.
When it is disabled, the graphic/text mode expansion
function is disabled and the graphic/text image will be
centralized on the LCD. If it is enabled, the graphic/
text image will be expanded to the full LCD screen.
Enabled or Disabled
Resume on LAN/Modem Access When enabled, the computer will wake up from sleep
state if any LAN access to it occurs.
Enabled
or Disabled
Hotkey Beep When enabled, the computer makes a beep when a
hot key is pressed. Enabled or Disabled
Fast Boot When this flag is set, the ACPI OS will communicate
with the BIOS to decide the next POST is Fast or
Diagnostic. Ensabled or Disabled
Boot from LAN When enabled, remote host with appropriate boot
image can boot this computer.
Disabled
or Enabled
Intel
R
SpeedStep
TM
Technology
Select CPU power policy Automatic
Maximum Performance
Battery Optimized
Reversed
Boot Drive Sequence There are four priorities that can let the user to specify
the boot device sequence.