manualshive.com logo in svg

Acer SX2830, Руководство по обслуживанию, Страница: 103 / 113

Поделиться
Скачать
Acer SX2830 Скачать руководство пользователя страница 103

chapter 6

95

This chapter offers the FRU (Field Replaceable Unit) list in global configuration of the SX2380 desktop 
computer. Refer to this chapter whenever ordering the parts to repair or for RMA (Return Merchandise 
Authorization).

NOTES: 

•

When ordering FRU parts, check the most up-to-date information available on your regional web 
or channel. For whatever reasons a part number is changed, it will NOT be noted on the printed 
Service Guide. For Acer authorized service providers, your Acer office may have a different part 
number code from those given in the FRU list of this printed Service Guide. You MUST use the 
local FRU list provided by your regional Acer office to order FRU parts for service.

•

To scrap or to return the defective parts, follow the local government ordinance or regulations on 
how to dispose it properly, or follow the rules set by your regional Acer office on how to return it.

•

This document will be updated as more information about the FRU list becomes available. 

FRU (Field Replaceable Unit) List

Chapter 6

Содержание SX2830


















































































































Отзывы:

Нет отзывов