Acer Smart Touch Kit, Руководство пользователя

Страница: 3 / 30

3
Introduction
Smart Touch Kit is the first product in the world that supports finger touch and is easy to carry
around. It can make any projector or LCD screen controllable by touch of the fingers. Compared with the
traditional Whiteboard, the key features of Smart Touch Kit are: easy portability and finger touch control;
sense any non-transparent objects in addition to fingers; no specified requirement for the display device,
make any flat surface interactive; no limit on the interactive area, sizes range from 40”-100’’; can work
with whiteboards, save and record both marker pen and finger writing on the same board.
Smart Touch Kit includes: Laser Emitter, Camera, Calibration Software, Whiteboard Software.
Laser Emitter Camera
Features
1. Support finger touch: Use fingers instead of pens to write or control;
2. Support Multi-touch: Ten People can write and erase simultaneously;
3. Minimum installation distance is 35cm: For example, if the size is 80 inch, then the installation
distance is around 100cm;
4. Portable and easy to install. Total weight is around 1.6kg. Just put the emitter above the projection
screen by double adhesive tape, and mount the Camera on the projector or ceiling. No need for
professional technicians.
5. Turn ordinary boards or walls into finger touch screens. Our product can turn any flat surface (like
boards, walls, LCDs) into finger touch screens; just fix the emitter above the projection screen.
6. Able to operate on any non-transparent objects. In the active area, any non-transparent object can be
used as a pen.
7. Convert normal LED screens into finger touch screens. Support active screen sizes ranging from
40-100inch. When using it, add one sheet of glass on the screen surface and fix the IWB hardware on the
glass to convert LED screen into a finger touch screen. Compared to the add-on infrared technology
solution, it has lower cost and there’s no need to customize. The cost will not increase with the screen
size.