13
Calibration Software
Introduction
Start IWB calibration software, click “operation” menu
Run:
Run the calibration program to start the sensor icon.
Stop:
Close the sensor icon, then no more touch functions.
Parameter Setting:
Software parameters Setting
Auto Mask Clutter:
Auto shield the interference point from out side environment. After the auto mask
clutter, the auto calibration can only be continued.
Manual Mask Area:
After the auto mask clutter, if there is still some interference light spots, manual
shied the interference light spot by adding mask area.
Manual Calibration:
After auto mask clutter, do manual calibration. It will realize the touch function after
success calibration.
Auto Calibration:
The software realizes auto calibration without manual click. The calibration will finish
within 5 seconds, and it realizes the touch function after success calibration.
Light spot Sampling:
The light spot sampling can only be continued after manual calibration or auto
calibration, which make our product adapt with current usage environment and user experience effect will
be better.
Disable Optical Pen Control:
After choosing it, the touch function will pause.
Exit: After software exit, the touch function will stop.
Содержание Smart Touch Kit
Страница 1: ...1 Smart Touch Kit USER MANUAL ...
