5 Upgrading your computer
24
English
Removing and installing a hard drive
The computer supports up to two easy-swap hard disk drives. Each hard disk is
mounted in a carrier that holds a standard 3.5-inch Serial ATA hard drive and
connects to a SATA interface on the disk cage backplane.
Easy-swap technology shortens system downtime for changing the hard disk or
performing an upgrade.
Note:
Do not attach or detach the hard drive while the system is on. It may
cause damage to the device or lose data.
To remove a hard drive:
1
Observe the ESD precautions described on page 22.
2
Open the drive bay door.
3
Press the HDD carrier latch, then pull the lever and slide the carrier from the
chassis.
4
Place the HDD carrier on a clean surface.
Содержание Predator G5920
