32
E
nglish
Appendices
Lamp Changing Procedure:
1. Turn off the power to the projector by pressing the Power/Standby button.
2. Allow the projector to cool down at least 30 minutes.
3. Disconnect the power cord.
4. Use screwdriver to remove the screw from the cover.
X
5. Remove the cover.
Y
6. Remove the 2 screws from the lamp module.
Z
7. Pull out the lamp module.
[
•
To replace the lamp module, reverse the previous steps.
Warning: Lamp compartment is hot! Allow it to cool down before changing
lamp!
Warning: To reduce the risk of personal injury, do not drop the lamp
module or touch the lamp bulb. The bulb may shatter and cause injury if
it is dropped.
