12
E
nglish
Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely connected.
3. Turn on the lamp by pressing “Power/Standby” on the control panel.
X
The startup screen will be displayed for 20 seconds and the Power/Standby indicator
will turn solid green.
4. Turn on the source (computer, notebook, or video player, etc.) The projector will
automatically detect your source.
If the projector displays “
Searching...
” please make sure the signal cables
are securely connected.
If connecting multiple sources at the same time, use the “Source” button on
the remote control or projector control panel to select the desired input.
Press the “Source” button repeatedly until the desired input is displayed.
Turn on the projector first and then the computer.
Power/Standby
1
