Figure 13 Range
Usage and Replacement of Lamp
The light source lamp has a limited service life.
The picture will become dark or the color will fade after the lamp
has been used for a long time. In such cases, continued use of the
lamp could cause a malfunction. Replace the lamp with a new one.
A Lamp/temperature Status LED Indicator
1.
Lamp in excess of service hours
When the LED light is a continuous red, it means the lamp has
exceeded (*1500) service hours. After this light appears, it is
advisable to replace the projection lamp as soon as possible.
Figure 14 Lamp replacement
warning signal I
“CHANGE THE LAMP, AND RESET THE LAMP
TIMER” will be displayed on the screen if
the lamp has been operated for 1200
hours.
Figure 15 Lamp replacement
warning signal II
“CHANGE THE LAMP, THE POWER WILL TURN OFF
AFTER 20 HOURS” will be displayed on the
screen if the lamp has been operated for
1479 hours. The “20” will count down.
Figure 16 Lamp replacement
warning signal III
“CHANGE THE LAMP!” will blink on the
screen together with a red LED if the
lamp has been operated for more than
(*1500) hours (see figure 18). The power
will turn off automatically after 10
minutes. All three of the above messages
will not display for more than 3 minutes,
but each message will be displayed
whenever you turn on the lamp.
English 12
