35
English
To Change the Lamp
1
Turn off the projector by pressing the power button.
2
Allow the projector at least 30 mins to cool down.
3
Disconnect the power cord.
4
Open the screw covers on both sides of the projector. (Illustration #1)
5
Remove the two screws on both sides of the projector at the same time.
(Illustration #2)
6
Open the top cover. (Illustration #3)
7
Remove the three screws that secure the lamp module (Illustration #4) and
pull up the lamp bar.(Illustration #5)
8
Pull out the lamp module by force. (Illustration #6)
To replace the lamp module, reverse the previous step.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
