25
Eng
lis
h
Management
High Altitude
Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Audio Settings
Volume
•
Press
to decrease the volume.
•
Press
to increase the volume.
Power On/Off
Select this function to adjust the notification volume when turning
the projector on/off.
Lamp Settings
Lamp Information
•
Lamp Timer
Displays the lamp’s elapsed operating time (in hours) including
Normal, Eco, and EcoPro.
•
Lamp Life
Displays the percentage of the remaining lamp life.
Lamp Hour Reset
Press the "ENTER" button and choose "Yes" to turn the lamp hour
counter to 0 hours.
ECO Mode
Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode. Choose "EcoPro" to dim the projector lamp
to the very low status which will extend the lamp life to 20,000
hours.
Security Settings
Change Password
To set or change password please follow up OSD on-screen steps.
<Note> If you forget the password, contact your local reseller or
service center to decode the number.
Change Security
•
Power On Lock
Choose to enter the password next time you turn on the projector.
You will be asked to enter the current password before setting
"On" or "Off".
Test Pattern
Choose "On" to enable the function and the projector displays the
test pattern.
