21
Eng
lis
h
Management
Language
Sets a language for the OSD menus. Use
/
to select
your preferred language.
Auto Shutdown
(Minutes)
The projector will automatically shut down while there is
no signal input detected after the time you set.
ECO Mode
Choose "On" to dim the projector LED brightness, which
will also lower the power consumption, reduce noise, and
extend the LED life. Choose "Off" to return to the normal
mode.
USB 5V (Standby)
Selecting "On" enables the function. Both micro USB cable
inside the projector and the DC 5V out port/USB A port (if
available) on the back of the projector can output 5V
power when it is in standby mode.
Enabling this function slightly increases the standby
power consumption.
High Altitude
Choose "On" to turn on the High Altitude mode. When this
function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
AC Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord.
Firmware Version Displays current firmware version.
Firmware
Upgrade
•
OTA (Over-the-air):
a
Connect the projector to the internet using the
Acer eDisplayPro app.
b
Press "ENTER" after selecting "OTA" and the
projector will automatically search for the latest
firmware version available.
c
Select YES when the projector pops out a message
to remind you that there is a new firmware
version for you.
Do not turn off the projector while the firmware is
updating.
