![background image](http://html.mh-extra.com/html/acer/ferrari-1000-series/ferrari-1000-series_service-manual_6193097.webp)
87
Chapter 4
Invalid System Configuration
Data
BIOS ROM
System board
I/O device IRQ conflict
Run
Load Default Settings
in BIOS Setup Utility.
RTC battery
System board
Operating system not found
Enter Setup and see if fixed disk and drive A: are
properly identified.
Diskette drive
Hard disk drive
System board
No beep, power-on indicator
turns off and LCD is blank.
Power source (battery pack and power adapter). See
Power System Check
.
Ensure every connector is connected correctly.
Reconnect the DIMM.
LED board
System board
No beep, power-on indicator
turns on and LCD is blank.
Power source (battery pack and power adapter). See
Power System Check
.
Reconnect the LCD connector.
Hard disk drive
LCD inverter ID
LCD cable
LCD Inverter
LCD
System board
No beep, power-on indicator
turns on and LCD is blank. But
you can see POST on an
external CRT.
Reconnect the LCD connectors.
LCD inverter ID
LCD cable
LCD inverter
LCD
System board
No beep, power-on indicator
turns on and a blinking cursor
shown on LCD during POST.
Ensure every connector is connected tightly and
correctly.
System board
No beep during POST but
system runs correctly.
Speaker
System board
Error Message
FRU/Action in Sequence
Содержание Ferrari 1000 Series
Страница 47: ...Chapter 1 37 ...
Страница 76: ...Chapter 2 66 Step Three Machine 1 Reboot system and key in 0KJFN42 or UVEIQ96 in the HDD user password column ...
Страница 123: ......