Acer Ferrari 1000 Series, Руководство по обслуживанию

Страница: 64 / 123

Chapter 2 54
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic
Input/Output System). Your computer is already properly configured and optimized, and you do
not need to run this utility. However, if you encounter configuration problems, you may need to
run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises.
To activate the BIOS Utility, press
m
during POST (when “Press <F2> to enter Setup” message is
prompted on the bottom of screen). The setup screen displays BIOS as follows:
During setup, all Fn function keys and power saving functions are disabled. There are five menu
options: Main, Advanced, Security, Boot and Exit. Follow these instructions below
•
To choose a menu, use the cursor left/right keys (
zx
).
•
To choose a parameter, use the cursor up/down keys ( wy ).
•
To change the value of a parameter, press p or q .
•
Press
^
while you are in any of the menu options to go to the Exit menu.
•
In any menu, you can load default settings by pressing
t
. You can also press
u
to save any changes
made and exit the BIOS Setup Utility.
NOTE:
You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for
a particular menu are shown on the bottom of the screen. Help for parameters are found in the Item
Specific Help part of the screen. Read this carefully when making changes to parameter values.
Function Item
Information Display the system informations
Main Allows the user to specify standard IBM PC AT system
parameters
Advanced Provides advanced settings of the system
Security Provides security settings of the system
Boot Allows the user to specify the boot options
Exit Allows the user to save CMOS setting and exit Setup
System Utilities
Chapter 2