15
English
5. FreeSync: Default is On, can choose Off.
6. VRB: To choose whether to support dynamic picture more clean control, default is Off.
7. Refresh Rate Num: Display the panel’s current refresh rate on the screen.
8. Aim Point: Show an Aim point on the screen for shooting games.
Note:
1. If FreeSync is "On" , then the Over Drive selection is set to "Normal"
automatically.
2. If FreeSync is "OFF", then the user can set Over Drive to either one of the
three settings including: (a) Extreme (b) Normal (c) Off.
3. DP and HDMI1 support "FreeSync".
4. If FreeSync is set to "On", please note that the screen might flicker during
use.
5. The following situations may happen when playing games with FreeSync
enabled:
• Depending on the type of graphic cards, the game settings, and the video
you are playing, a flickering screen may occur. Please try to set current
FreeSync mode to "Off ", or visit the official AMD website to update the
graphic card’s driver.
• When using FreeSync, the screen may flicker due to different output
frequencies of the graphics card.
• When FreeSync is set to "On " , changing the resolution may result in
screen-tearing. It is recommended to set FreeSync to "Off" and then
change the resolution.
Note:
1. It is not support VRB when HDR set to "On" or "Auto".
2. VRB function does not affect the (Logo, Aim Point, Message and Input Icon)
brightness.
3. When turn on FreeSync, will set VRB to "Off" automatically.
4. When to adjust Brightness, Blue Light and ACM, will set VRB to "Off"
automatically.
5. When detect input timing lower than 75Hz, will set VRB to "Off"
automatically and grey out to disable.
6. Due to the IC control dynamic picture to be clear when switch on VRB
function, the overall brightness will become dark, and the brightness of
"Extreme" will be darker than "Normal".
Note:
If FreeSync set "On" you can see the V Frequency to changes in the OSD.
Note:
Aim Point is not supported in PBP mode.
