Acer DV433, Руководство пользователя

Страница: 27 / 74

26
Chapter 2
Preparation for use
Connecting with a digital video source
Digital connection:
• Connection via the HDMI IN connector
(1) Connect an HDMI cable (commercially available) to the HDMI1 IN or HDMI2 IN connector.
(2) Select [HDMI1] or [HDMI2] according to the connected connector by pressing the SOURCE button on the LCD
display or the HDMI1 or HDMI2 button on the infrared remote control.
• Connection via the DVI-D IN connector
(1) Connect a DVI-D cable (commercially available) to the DVI-D IN connector.
(2) Select [DVI-D] using the SOURCE button on the LCD display or the DVI-D button on the infrared remote control.
Second display connection:
• Connect the DVI-D OUT connector on the first display and the DVI-D IN connector on the second display using a
DVI-D cable (commercially available).
Audio connection:
• For HDMI 1/2/DVI-D, the default setting of audio source is a TMDS signal with HDMI/ DVI cable. Users can use
an external audio source if an audio cable (ø3.5-mm stereo mini) (commercially available) is connected to the
LINE IN connector. LINE IN” should be selected for the audio input source.
• To output the audio to the second display, connect the LINE OUT connector on the first display and LINE IN
connector on the second display using an audio cable (ø3.5-mm stereo mini) (commercially available).
• The daisy chain connection allows up to 9 LCD displays to be connected (when using
2-meter cables. However, the maximum number of connectable LCD displays may be lim-
ited. It is recommended to check the number of connectable LCD displays in your installa-
tion environment in advance.
• Set the power off time using the POWER SAVE selection in the SETUP menu.
• Tiling mode can be used in HDMI1/2 for multi displays, if there is an external HDMI split-
ter equipped.
N O T E
UTC/cppl!!Qbhf!37!!Uvftebz-!Nbz!35-!3127!!6;66!QN