EN-48
Digital Camera >>
Setup Menu (Custom tab)
1. Slide the mode switch to [ ] and set
the mode dial to [
].
2. Select the [Custom] menu with the
X
button.
The [Custom] tab of the set-up menu
is displayed.
3. Select the desired [Custom] option item
with the
S
/
T
buttons, and press the
SET
button to enter its respective menu.
4. Select the desired setting with the
S
/
T
buttons, and press the
SET
button.
5. To exit from the set-up menu, change
the mode dial setting.
Date/Time
This sets the date and the time.
Refer to the section in this manual titled “
Setting the Date and Time
” for further details.
Sys. Reset
This returns all basic settings to the camera’s default settings. Note that the
date and time setting will not be reset, however.
Cancel:
Does not reset the camera to the factory default settings and the
current settings are retained, unchanged.
Execute:
Resets the camera to its original factory default settings.
Language
This sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled “
Choosing the OSD Language
” for
further details.
Video Output
This sets video output standard of the camera so you may connect your camera
to video equipment.
NTSC:
NTSC broadcast standard.
PAL:
PAL broadcast standard.
System Info.
This displays the firmware version of the camera.
