EN-12
Digital Camera >>
Using an AC Power Adapter
Using an AC power adapter prevents the camera from automatically powered
off while transferring files to your computer.
Perform the steps in the preceding section “Charging the Battery”.
Make sure to use only the AC power adapter specified for the digital
video camera. Damage caused by the use of an incorrect adapter is not
covered under the warranty.
Inserting and Removing an SD Card
Images captured with the camera will be stored on a Secure Digital (SD) memory
card. You must have an SD card in place to use the camera. Before inserting or
removing the SD card, make sure that the power of the camera is off.
Inserting an SD card
1. Open the battery/SD card cover.
2. Insert the SD card in the correct
orientation shown.
Hold the SD card with its front side
(printed arrow) facing the rear side of
the camera, and then insert the card
as far as it can go. There will be a
distinct click as the card seats fully
into the card slot.
3. Close the battery/SD card cover.
Removing an SD card
Open the battery/SD card cover, press lightly on the edge of the SD card and it
will eject.
If the camera is powered on without an SD card inserted, a message “NO
CARD” appears on the LCD monitor.
To prevent valuable data from being accidentally erased from an SD card
you can slide the write-protected tab (on the side of the SD card) to “LOCK”.
However, to save, edit or erase data on an SD card, you must unlock the card.
