37
English
Problems with the Projector
9
Image is too small
or too large
•
Adjust the zoom lever on the top of the projector.
•
Move the projector closer to or further from the
screen.
•
Press "MENU" on the control panel or remote
control. Go to "Display settings" > "Aspect Ratio"
and try different settings.
10
Image has slanted
sides
•
If possible, reposition the projector so that it is
centered on the screen and below the bottom of the
screen.
•
Perform keystone correction (if available).
•
Press "MENU" on the control panel or remote
control to open the OSD menu. Go to "Keystone" to
make adjustments.
11
Image is reversed
•
Select "Default Adjustment" > "Projector
Installation" on the OSD and adjust the projection
direction.
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.